Laminated products not only enhance the look of the space but also require low maintenance. On top of that, they give a rich, wood finish to the product at lower costs. It is an eco-friendly and inexpensive home interior décor alternative to hardwood.
Laminates are generally used for adding surface finish to flooring, MDF, particleboard, plywood, wall panels, and wooden furniture. They are expertly crafted by pressing different layers of plastic resins and flat paper. Its topmost layer features some colour or pattern.
Types of laminates
- Industrial laminates – They are known for their unbeatable durability and strength. These laminates are resistant to damage. Plus, they are also fire-resistant, chemical-resistant and antibacterial, making them ideal for hospitals and other similar industries.
- Decorative laminates – They are superior in terms of patterns and finishes. The aesthetic appeal of these laminates is incomparable. It can be used for adding a sophisticated touch to the home interior.
- Post-formed laminates – If you are looking for a thinner version that can be used for wrapping the columns and tables, then these laminates are a perfect option for this purpose as they are comparatively flexible.
- High-pressure laminates – A thicker and self-supporting variety, high-pressure laminate is required to be glued to the installation. Usually, Fevicol for wood is needed when it comes to installing these laminates on the surface.
Importance of choosing the right adhesive
Trusted Brand Of Adhesive For More Than 50 Years
“Fevicol SH” is a synthetic resin adhesive intended for wood working and various materials where one of the surfaces to be bonded is porous. SH strongly binds wood, plywood, laminate, veneers, MDF and all types of boards and cork.
A waterproof adhesive for wet areas
Weather change and continuous exposure to water and moisture expose furniture to stress. This could result in opening of joints and de-bonding of laminates in-spite of using good quality material. ‘Fevicol Marine’ is a specialised waterproof adhesive that protects furniture from de-bonding even when exposed to wate
Hi Performance Adhesive – Bonds in just 10 Minutes
Bubble has always been a trouble in Woodworking especially in vertical laminations or large sheet lamination. The dream design can get shattered if bubble forms on the laminate and plywood.
Fevicol Hi-Per powered with Anti-Bubble formula provides instant grab and uniform glue transfer leading to a strong contact between plywood & laminate. Hence there is a very little chance of air entrapment and contact gap which significantly reduces the probability of bubble formation. It also offers superior tack development, faster grab and reduced setting time.
When it comes to adhesive selection, it is always recommended to understand from the adhesive manufacturer on the right adhesive for the required applications. In the current scenario, there are highly specialized adhesives which are available for multiple applications including wood, laminate, metal, ACP, PVC, Acrylic, glass and plastic. Also, there are specialized adhesives for industrial grade, spot fixings, quick setting, water-resistant, heat-resistant and many other such typical properties that one can choose from.
Different types and uses of Fevicol
Fevicol comes in two variants – Fevicol MR and Fevicol SH. The latter is used for woodwork, and it gives a strong and lasting bond. The MR variant is formulated for decoupage, while SH is used on canvas, glass, plywood, laminate, etc.
Fevicol MR is ideally used in art and craft. It is generally available at stationery or art/craft shops. It is a milder adhesive and works fine for cloth, paper, and other delicate materials.
Fevicol SH comes with a combination of wood fibres giving a lasting and strong bond to the two surfaces. Available at carpentry shops, the SH has synthetic resin, which hardens once dried. Also, its consistency is comparatively thicker.
Adhere to the following adhesive application guidelines for lamination:
|Fevicol SH||Fevicol SR 998||Fevicol SPEEDX||Fevicol SRXPRESS|
|Composition||Water-Based Synthetic Resin Glue||Rubber Based Synthetic Glue Containing Solvent||Synthetic Resin Glue||Rubber Based Synthetic Glue Containing Solvent|
|Pressure To Be Used For Smooth Finish||6-7 Hours||30-40 Minutes||2-3 Hours||20-30 Minutes|
Method to apply adhesive for a perfect laminate installation
Laminate brings out the best look of the space when installed smoothly. Adhesive failure is one of the common problems people face when installing laminates to the product/walls/floors. Check out the pro tips/guidelines listed below to achieve the desired finish.
Avoid working on contaminated surfaces
It is essential to clean the surface before using Fevicol products for laminate installation. Surfaces with oil, grease, dust/ debris or any other impurities aren’t ideal for lamination until they are cleaned, cured, and treated to hold the adhesive. Also, very important to check the moisture content of the substrate and should be less than 10%.
There are several treatment options for surface preparation such as abrasion and washing. However, it is best to determine chemistry between the adhesive and substrate before choosing your ideal treatment method. Plus, verify the preparation technique with the help of an expert.
Ensure even adhesive coverage and proper application technique
It happens to be one of the significant causes of adhesive failure, mainly when applied manually. Laminates need an adequate quantity of adhesives for optimal bonding with the surface. Also, make sure to use good quality adhesive as it is the core element in laminate installation.
- It is always best to apply at least two coats of adhesive on the surfaces. But also important to ensure appropriate usage based on the parameters and recommendations of the adhesive
- Ensure sufficient open time given before pasting of laminates to gain full initial grab and bond strength
- Be extra careful while working on the edges of the product and sanded surface as they tend to be more porous.
- Apply necessary recommended amounts of Fevicol adhesive on these areas.
Do not consider laminate installation in high humidity conditions
Environmental conditions such as high pH, humidity, and carbon dioxide levels increase chances of adhesive failure. These conditions are more likely to affect the curing for adhesives and slower the process. The strength of the adhesion largely depends on environmental conditions. Therefore, it is essential to perform a laminate installation test on a small surface area using Fevicol. Thus, it is very important to also check the moisture content of the surface using a moisture meter.
Apply a sufficient amount of glue on both the surfaces for a strong bonding
Wipe the surface using a damp cloth or smoothen it using sanding paper. Once the surfaces are ready for bonding, spread one or two coats (as needed) of the adhesive uniformly. Make sure the entire surface of both the products is adequately covered with the appropriate adhesive. Apply appropriate amount of glue as per recommendations provided by the adhesive guidelines. An extra layer will strengthen the bonding and eliminate the possibilities of adhesive failure or non-uniform finish.
Now bond the two surfaces so that a seal is formed. Apply pressure on the surface to fix the bond and leave it to dry. Viola! You are done. Decorating the home interior with laminates is not rocket science. Just be careful during the application process.
Adhesives like Fevicol make the job of laminate application easier. Laminating the furniture improves product reliability, durability, performance, quality and aesthetics while offering design flexibility. Moreover, it also improves process productivity and reduces the manufacturing cost of the product. You can also get the best lamination ideas at HomeLane. You will have the opportunity of learning intelligent use of space and laminate combinations from top industry experts.
Modular Kitchen Designs | Home Interior Designs | Wardrobe Designs | Living Room Designs | Bathroom Designs | Space Saving Furniture | Home Office Designs | Pooja Room designs | Foyer Interior Design | Kids Bedroom Design | Interior Lighting Design |False Ceiling | Home Wallpaper | Furniture Design
Party Ideas for Holi | Assam Type House Design | Pop Designs for Bedroom | Window Grill Design | Plinth Area | MDF Vs Particle Board | Wall Colour Combinations | Vastu Shastra Colors For Living Room | Classical Interior Design | Wardrobe Dimensions | Parapet Design | How To Prevent Dust In Room | Types Of Kitchen | Wall Panel Design | Small Modular Kitchen | Pooja Room Design| HDF Wood | French Door Design | Bedroom Wardrobe | Solid Wood Vs Engineered Wood | Athangudi Tiles